Camso X4S UTV Track
Specification
- Drive Type: Internal drive
- Frame: Carbon steel
- Idler & mid-roller Wheels/Tire: 134 & 202 mm double bearings wheel. Standard and replaceable sealed bearings. Elastomer outer band. Bladder-type wheel cap.
- Hub and bearing.g: Cast steel multi-bolt (4) pattern hub.
Tandem & suspension: Mono front tandem on pivot point with bolted wheels.
Description:
The NEW Camso X4S track system has been designed to make the most of any outdoor activities on your small to the mid-size side-by-side vehicle with 3 seats or less.
Features:
Camso’s Flex-Track Design
Front-mounted tracks with flexible sides and slight curve toward the inside
Stable handling
More comfortable ride than traditional flat tracks
Precise steering for pleasant long-distance riding and long working hours
Solid Steel Frame
New geometry provides better front steering and handling
Idler And Mid-Roller Wheels
Increased width (26 mm) provides better track support
Double bearing bolted on wheels for easier serviceability
Standard and replaceable sealed bearings for economic maintenance
Bearing Housing
Double bearing design with oil bath lubrification
Double bearing hubs and oil bath housing for optimum durability
Camso X4S
Vehicle size: 400 cc to 700 cc
Offset (length): Front: 24 in. (609 mm) Rear: 27 in. (685 mm)
Offset (width): 6 in. (153 mm)
Ground clearance: Front height: 15 3/8 in. (390 mm) Rear height: 14 5/8 in. (372 mm)
Weight (average): Front: 72.6 lb (33kg) Rear: 79.4 lb (36 kg)
Height: Front: 23.8 in. (604 mm) Rear: 23.2 in. (590 mm)
Length: Front: 40 in. (1016 mm) Rear: 42.5 in. (1081 mm)
Width: Front: 11.5 in. (292 mm) Rear: 12.5 in. (318 mm)
Rubber Track
Width: Front: 11.5 in. (292 mm) Rear: 12.5 in. (318 mm)
Length: Front: 93.4 in. (2372 mm) Rear: 98.5 in. (2507 mm)
Lug Height: Front: 1.25 in. (32 mm) Rear: 1.25 in. (32 mm)
Rubber track: Front: Flex Rear: Flat
Performance
Ground surface: 2000 sq. in. (1.30 m²)
Maintained speed (average): ⅔
Specification
Drive Type: Internal drive
Frame: Carbon steel
Idler & mid-roller Wheels/Tire: 134 & 202 mm double bearings wheel. Standard and replaceable sealed bearings. Elastomer outer band. Bladder-type wheel cap.
Hub and bearing.g: Cast steel multi-bolt (4) pattern hub.
Tandem & suspension: Mono front tandem on pivot point with bolted wheels.
Maintenance
installation time (average): 2 hrs
Subsequent: 1 hr
Fitment Guide
Page 1 | Page 2 | Page 3 | Page 4 | Page 5 | Page 6 | Page 7 | Page 8 | Page 9 | Page 10