Iron Baltic 18hp Briggs & Stratton V2 1800 mm Electric Starter Snow Blower

Description

A snow blower is the most efficient tool for snow removal. It is possible, with a blower, to move snow many metres away with very little effort, best suited for Nordic and also mountain areas with larger amounts of snow. It is best suited for the winter maintenance of roads and squares.

Iron Baltic snow blowers range vary in between different working widths and engine options. Low-powered (13hp/14hp) versions are designed foremost for lighter snow removal works. We recommend using snow blowers with a stronger engine (18hp) for the removal of thicker layers of snow and wet snow.

The universal adjustable telescope coupling frame allows for the quick and easy attachment of the snow blower to most ATVs or UTVs that have rear ball-type hitch fitted. The coupling frame is attached to the rear towing hook and to the front suspension arms via tension adjustable chains. The installation time, depending on the vehicle and experience could be as less as 5 minutes.

An ATV front winch (min 1500 lbs) and towing hook are required for installation!

Front mounted winch and rear ball type hitch required for installing the snow blower!

Features

• Universal telescopic adjustable, strong square tube push frame allows installation to most 4x4 ATV/UTV machines.

• The push frame is fixed to the rear hitch ball and with adjustable chains to the ATV front arms.

• Installation takes 5-10 minutes.

• 360 degrees rotating wheel carriers with 4” wheels to carry the weight of the snow blower. The ATV or UTV is used only to push the machine.

• Control panel for ejection tube movement with a stop button to shut off the blower engine.

• Working position and transportation position (set with vehicle-fitted winch).

• Easy to use belt tensioner, fast removal and installation of the clutch belt, if needed.

• Protective shaft bolts against excess load in rotor shaft movement.

• Comes with installation and user manuals.

• The Max vehicle length for snow blower installation, measured from hitch ball to front end nose, is 3100mm.

• Video Clip: https://youtu.be/6LneCdNec6Q

• The wider 1800mm/71 inches body is suitable to use with larger side-by-side/UTV machines.

• Working width 1250mm/1800mm

• Working height 500mm

• Ejection distance approx. 15 meters

• Electric motor adjustment of the ejection tube via the onboard control panel

• Telescopic mounting frame adjustable to machine length

• Transport position and working position (adjustable with ATV winch)

• Safety bolts to prevent damage from obstructions